 |  | | | |  | |  |  | Beretta 92FS .177 Replica by Umarex |  | |  |  | |
 Posted: Tue Feb 26, 2008 7:29 pm |
 |
|
| Descentia |
| Member |
 |
|
| Joined: 24 Feb 2008 |
| Posts: 34 |
|
|
|
|
Any ideas?
What modifications can be done to this gun to increase power/accuracy? |
|
|
|
|
|
|
| |  |  | | | |  |  |
| | | | | | | | | | | | | | |
| Posted: Wed Feb 27, 2008 4:40 am |
|
|
| Alstone |
| Moderator & Site Supporter |
 |
|
| Joined: 01 Mar 2007 |
| Posts: 4139 |
| Location: Linconshire, ENGLAND |
|
|
|
You can mod these guns but they are a bit of a sod to take apart and re-assemble, to increase the output you need to do some work on the valve unit and the hammer spring. but to be honest it's not worth the effort unless you also improve the fit of the top slide, because from new the movement in the slide allows the barrel to move about which is no good for accuracy.
Al |
|
_________________
 |
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Wed Feb 27, 2008 10:40 pm |
|
|
| Descentia |
| Member |
|
|
| Joined: 24 Feb 2008 |
| Posts: 34 |
|
|
|
|
| Al, would you consider making universal hammer weights similar to that which you made for your Twinmaster, and possibly selling them for people on this forum? |
|
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Thu Feb 28, 2008 4:04 am |
|
|
| Alstone |
| Moderator & Site Supporter |
|
|
| Joined: 01 Mar 2007 |
| Posts: 4139 |
| Location: Linconshire, ENGLAND |
|
|
|
| Descentia wrote: |
| Al, would you consider making universal hammer weights similar to that which you made for your Twinmaster, and possibly selling them for people on this forum? |
You can't really make a universal hammer weight as each one has to fit perfectly otherwise they come off with the constant thump of nthe hammer, also you need diffrent weights for diffrent guns. Another thing is that universal fittings tend to be ugly.
Al |
|
_________________
|
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Thu Feb 28, 2008 10:02 am |
|
|
| Descentia |
| Member |
|
|
| Joined: 24 Feb 2008 |
| Posts: 34 |
|
|
|
|
I was just throwing that out there.
I see your point, though. |
|
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Thu Feb 28, 2008 1:15 pm |
|
|
| StevieLaner7777 |
| Moderator |
 |
|
| Joined: 07 Mar 2007 |
| Posts: 1060 |
| Location: Herefordshire, UK |
|
|
|
| Alstone wrote: |
Another thing is that universal fittings tend to be ugly.
Al |
Couldn't agree more with you Al!
Stevie  |
|
_________________
"Who Dares Wins" - SAS 22nd Regiment Hereford. |
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Fri Feb 29, 2008 10:58 am |
|
|
| Descentia |
| Member |
|
|
| Joined: 24 Feb 2008 |
| Posts: 34 |
|
|
|
|
So... back to the drawing board...
How would I go about making the slide fit better? |
|
|
|
|
|
|
| | | | | | | | |
| | | | | | | | | | | | | | |
| Posted: Fri Feb 29, 2008 11:26 am |
|
|
| Alstone |
| Moderator & Site Supporter |
|
|
| Joined: 01 Mar 2007 |
| Posts: 4139 |
| Location: Linconshire, ENGLAND |
|
|
|
| Descentia wrote: |
So... back to the drawing board...
How would I go about making the slide fit better? |
This is a slide off a CP88 which is very much the same as a 92FS, the sides of the slide need pressing together to make a better fit and stop any movement in the slide.
To do this you need to fold some thick cardboard around the slide, put it in a vice and gently squeeze the sides together where the internal lugs are, they will spring back a bit when you release the vice, it's a bit of trial and error but don't go mad and crack the side off.
Al |
|
_________________
|
|
|
|
|
|
| | | | | | | | |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|
