Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Rifles » Unven Breech Seal on Remington Summit Rifle
Post new topic  Reply to topic View previous topic :: View next topic 
Unven Breech Seal on Remington Summit Rifle 
PostPosted: Sat Jan 18, 2014 3:39 pm Reply with quote
Thumb
New Member
New Member
Joined: 22 Jun 2013
Posts: 8
Tearing down my Remington Summit rifle to replace the srping guide I decided to replace the seals also especially since the breech seal seemed to be bad. Well, I took out the old seal and put in a new one and what do you know, it sat in there just as uneven as the original factory seal. Is this common in these rifles or is something wrong? Here's a couple pics.


Notice how the right side(actually left looking at this pic) is higher than the other side which is flush with the breech.


Same seal looking from the opposite direction. You can see how it is higher on the right side

I looked at the groove where the seal goes in and do not see anything there that would keep the seal from seating.
View user's profile Send private message
 
PostPosted: Sat Jan 18, 2014 4:04 pm Reply with quote
AirGunEric
Site Admin
Site Admin
Joined: 20 Jan 2007
Posts: 6931
Location: "Out There"
That's not "normal". If you do not have anything in the o-ring slot, and the o-ring is even all the way around, perhaps a bit of trimming or shimming would be in order to even things out.

That being said, if you have no air escaping from around the seal when you shoot- leave it alone, it obviously isn't causing an issue.

_________________
`

I'd say "I care."

But I'd be lying.


Canadian Airgun Supplier: http://www.scopesandammo.com/storefront
View user's profile Send private message Visit poster's website
 
PostPosted: Sat Jan 18, 2014 9:11 pm Reply with quote
Thumb
New Member
New Member
Joined: 22 Jun 2013
Posts: 8
I have no idea if there is. When I bought the rifle the seal was like that and after about 6 shots the spring guide broke. I was told it was probably the pellets that I was using were not good and air was escaping around the pellet and that is what made the guide break because it was slamming too hard because of the escaped air around the pellet.

I will be taking it to the range tomorrow to test it out and see what it does.
View user's profile Send private message
 
PostPosted: Tue Jan 21, 2014 2:55 am Reply with quote
Thumb
New Member
New Member
Joined: 22 Jun 2013
Posts: 8
Took it out to the range and all seems good, let's see how long it lasts this time.
View user's profile Send private message
Unven Breech Seal on Remington Summit Rifle 
  Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.