 |  | | | |  |  |  |  | Results from new RVA in AR2078 |  | |  |  |  |
Posted: Wed Feb 27, 2013 10:28 am |
|
|
| Sholo |
| Veteran Member |

 |
 |
| Joined: 24 Mar 2011 |
| Posts: 125 |
| Location: Eastern Ontario |
|
|
 |
I've been using my .177 AR2078 HPA for FT for about a year now. In order to meet the WFTF requirement of 12 fpe (max) I had to shorten my hammer spring by about 5/16" to keep the 10.34 gr JSB Heavies at around 720 fps. Worked great, but now I'm thinking that I would like to try Open PCP which is up to 20 fpe, but didn't want (re: can't afford ) another dedicated FT rifle, hence the new RVA seen here: http://airgunhome.com/agforum/viewtopic.php?t=9072
I still haven't picked up my full length spring yet, but I went ahead and did a shot count/efficiency test using my clipped spring anyways. After looking at the results, I'm now thinking that i might not even bother replacing spring...
Not sure if this is the right method, but this is how I did the shot count portion of test: I didn't want to fill to 3000 psi and shoot down to 1500 psi for each RVA setting (especially at the lower settings), so I pumped bottle to 2750 psi, then counted how many shots I got for every 250 psi used at turns 7 - 9.5, then multiply that number by 6 which would should roughly translate to a full 3000 psi fill and shooting down to the 1500 psi set point. Turns 5 and 6 I only used 100 psi (multiplied by 15) as I didn't think I would have enough pellets to finish!
We all know that the gauge on 13 ci bottles are not the most precise as far as the markings go (and I wanted to be as precise as possible), so I took factory gauge off and mounted my 3500 psi gauge that I use to check regulator output as it is marked in 50 psi increments as opposed to 500 psi on factory one. Looks goofy, but it worked!!! Once done with the test, I put the factory gauge back in.
I started from 5 turns in on the RVA (from minimum preload setting) as turns 1-4 the valve was locked up.
AR2078 / 13 ci Bottle reg'd @ 1500 psi / 10.34 gr JSB Heavy / Clipped H-Spring
RVA____Velocity_____FPE_____#Shots___PSI/Shot_____Efficiency fpe/ci
5_______179.2______.74______780_______1.9_________ 0.42
6_______357.1_____2.93______510________3__________ 1.11
7_______587.9_____7.94______276________5__________ 1.62
8_______731.4____12.29______180________8__________ 1.65
9_______853.5____16.73______108_______14__________ 1.34
9.5_____870.7____17.41_______66_______23__________ 0.85
Even with the clipped spring I pretty much already have the adjustment range I'm looking for. A longer, full length spring may give me a little more fps/fpe, but the efficiency is already taking a nose-dive as it is, so unless I'm missing something (?), more preload won't really gain me anything except a reduced shot count. Besides, most of the comps are 60-shot matches, which is how many shots I get now at max setting... Still a little shy of 20 fpe (10.34 gr @ 935 fps) but close enough...
Todd |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Results from new RVA in AR2078 |  | |  |  |  |
Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT - 5 Hours
Page 1 of 1
|
|
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|