 |  | | | |  |  |  |  | Metal maintenence. |  | |  |  |  |
Posted: Tue Nov 29, 2011 6:12 am |
|
|
| mod90 |
| Veteran Member |

 |
 |
| Joined: 04 Jun 2011 |
| Posts: 279 |
|
|
|
 |
| Any one got any idea on preventing rust from forming on metal parts thru the blue? Like along the barrel & air cylinder? I was thinking to use an enamel paint. Any ideas or help would be appreciated. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 7:48 am |
|
|
| SMP |
| Silver Status Member |

 |
 |
| Joined: 04 Feb 2011 |
| Posts: 1183 |
| Location: Just south of "Out There"- Land O Lakes Ontario |
|
|
 |
Paste wax is the tried and true method. Buff several coats of paste floor wax or car wax onto the surfaces that your concerned about.
I have also used spray jig a loo (spray silicone). Its not as long term but works well. |
|
_________________ Sean
 |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 9:28 am |
|
|
| Slavia |
| Moderator |

 |
 |
| Joined: 31 Mar 2008 |
| Posts: 4382 |
| Location: Waseca, Minnesota, USA |
|
|
 |
Paint (enamel, lacquer, acrylic, etc.) will protect the metal, but you're really talking about a complete refinish job. You would have to completely de-grease the surface, and the finish still won't stick real well unless you use an etching primer.
If you're going to the trouble of using paste wax, take the gun out of the stock and do the whole thing. That will protect the places that water can find but you can't see. Just be careful about getting the wax anywhere near the compression chamber. My Mendoza has an oil port on the side of the tube, and even the littlest amount of wax makes it smoke like a mosquito fogger. If you blueing is a little faded some black shoe polish (paste) will darken it.
Unscented mineral oil works well, too. (Well, O.K., I suppose if you like your pink stock you might also like the baby fresh scented mineral oil.)
One of my favorites is Armor All (which contains emulsified silicone). Spritz it on and spread/buff it out with a soft paint brush. The bristles will get into places that you can't reach with a cloth. The Armor All restores the appearance of weathered synthetic materials like a dream. Label the brush, because with the silicone it will never again be any good for paint. |
|
_________________
¡Listo! ¡Apunte! ¡Fuego! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 11:33 am |
|
|
| mod90 |
| Veteran Member |

 |
 |
| Joined: 04 Jun 2011 |
| Posts: 279 |
|
|
|
 |
Slavia, there's nothing significantly wrong with the blue finish. Its just that every few days when I pick up the gun, I can see really tiny rust spots like pin pricks on the barrel & air cylinder, I think its the moisture in the air. I think I'll try the black enamel spray paint and a clear coat enamel spray paint, then see how it goes from there.
I wonder if I apply some carnuba wax to enamel spray paint if that would help the paint keep out the moisture? Or would it deteriorate the paint job? |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 12:14 pm |
|
|
| Slavia |
| Moderator |

 |
 |
| Joined: 31 Mar 2008 |
| Posts: 4382 |
| Location: Waseca, Minnesota, USA |
|
|
 |
| Quote: |
| if I apply some carnuba wax to enamel spray paint if that would help the paint keep out the moisture? Or would it deteriorate the paint job |
If you let it dry thoroughly (like two weeks minimum) then it should be no different than waxing your car. |
|
_________________
¡Listo! ¡Apunte! ¡Fuego! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 1:29 pm |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
| I am often surprised at the many uses of penetrating oil on anything metal. If you have any hint of rust starting already- a good hand polish with penetrating oil of any sort seems to do a great job of cleaning things up. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 4:06 pm |
|
|
| WhitleyStu |
| Veteran Member |

 |
 |
| Joined: 15 Feb 2011 |
| Posts: 202 |
| Location: NE Indiana U.S.A. |
|
|
 |
| I use Rig on gun metal and Johnson's Paste Wax on the wood. I even Rig my stainless pistols that don't get used much. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Nov 29, 2011 5:14 pm |
|
|
| mod90 |
| Veteran Member |

 |
 |
| Joined: 04 Jun 2011 |
| Posts: 279 |
|
|
|
 |
| Ok. I just cleaned all the oil/grease off the gun. Taped off the iron sights. Removed and covered the scope( fumes travel) Plugged the scope stop holes. plugged the crown. Finally I sanded the cylinder & barrel. Then I applied the paint in a liberal fashion. It looks pretty decent, truth be told, it actually looks a lot better than it did new. It has a sort of barely rough matte finish, with a slight gloss. Kinda weird to explain. Will post a pic when its done drying. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Metal maintenence. |  | |  |  |  |
Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT - 5 Hours
Page 1 of 1
|
|
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|