 |  | | | |  |  |  |  | 22XX CO2/HPA Conversion Parts - SOLD !!! |  | |  |  |  |
Posted: Mon Jan 11, 2010 10:35 pm |
|
|
| rsterne |
| Moderator |

 |
 |
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
 |
The following parts are available as a complete set only:
Extended QB79 Tank Block with integral gauge mounting hole, c/w new O-rings, mounting screws & allen wrench
Discovery Gauge including extension (teflon tape required to seal after installation)
2289 Foregrip modified to mount to the tank block, with hole for the gauge
B&A Boss Max-Flow valve, modified with Disco mounting system, c/w new O-ring & mounting screws
Custom 22XX Main Tube, modified to mount the above components, cleaned and re-blued
The parts cost me $160 and I have a lot of hours of machining into them.... I have used these parts at up to 2000 psi, although I am not recommending that, or guaranteeing that as safe.... They should be OK used as a CO2 conversion, or an HPA system using a hand pumped 9 oz. CO2 cylinder (1800 psi max).... or a regulated HPA system where the regulator is fitted with a 1.8K burst disc (ie maximum regulator pressure of 1600 psi)....
These parts are used, in good condition, but sold as-is, and although I am aware of no defects, no warranty or guarantee of safety is provided.... As with any HPA conversion, safety is YOUR responsibility.... $250 plus postage from BC.... I also have two near-new 9 oz. CO2 cylinders (1800 psi rating) at $20.00 each for use with the above.... Take everything for $300 shipped within Canada.... EMT only.... No posts in this thread, please.... PM any questions....
Bob |
|
Last edited by rsterne on Sun Feb 14, 2010 2:42 pm; edited 1 time in total _________________ Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Thu Jan 14, 2010 5:41 pm |
|
|
| rsterne |
| Moderator |

 |
 |
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
 |
Please note:.... the foregrip in the above photos is no longer available as it has been used on my HFT project....
Bob |
|
_________________ Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun Feb 14, 2010 2:06 pm |
|
|
| packrat |
| Senior Member |

|
 |
| Joined: 16 Nov 2009 |
| Posts: 882 |
| Location: Out in the woods...Ellabell, GA. |
|
|
 |
uuh Bob, ya wanna update this?  |
|
_________________ HEY !! This getting old thing is NOT for sissies... |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sun Feb 14, 2010 2:41 pm |
|
|
| rsterne |
| Moderator |

 |
 |
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
 |
OOOPPPPSSS.... SOLD !!! ....
Bob |
|
_________________ Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Feb 15, 2010 7:10 am |
|
|
| packrat |
| Senior Member |

|
 |
| Joined: 16 Nov 2009 |
| Posts: 882 |
| Location: Out in the woods...Ellabell, GA. |
|
|
 |
Thanks! I feel better now  |
|
_________________ HEY !! This getting old thing is NOT for sissies... |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sat Feb 20, 2010 9:43 am |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
Dang, why didn't I see this before. I could've used this. If I had the money.  |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Tue Feb 23, 2010 5:44 am |
|
|
| packrat |
| Senior Member |

|
 |
| Joined: 16 Nov 2009 |
| Posts: 882 |
| Location: Out in the woods...Ellabell, GA. |
|
|
 |
HELLO !!!! Was posted on JAN.11 maybe, and I'm just guessing here, you should check the "for sale" section more often than once every 5-6 weeks..just a thought  |
|
_________________ HEY !! This getting old thing is NOT for sissies... |
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|