Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Airgun Smithing » benjamin varmit power pack help!
Post new topic  Reply to topic View previous topic :: View next topic 
benjamin varmit power pack help! 
PostPosted: Sat Mar 21, 2015 3:01 pm Reply with quote
dirtracer88
New Member
New Member
Joined: 21 Mar 2015
Posts: 5
Location: beatrice, nebraska
A friend of mine decided to do a trigger job on a Benjamin power pack and pulled the pin that holds the safety trigger now the gun wont engage the sear when it is cocked. there is a spring that puts pressure on the sear but I have no Idea on how it goes as my nitro trail has a whole different trigger. If somebody has a pic of the inside of this trigger or can tell me how to put this trigger back together please
View user's profile Send private message
 
PostPosted: Sat Mar 21, 2015 3:03 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
If you are talking about a Disco, the sear spring sits against the safety cross bar (pin).... so removing that pin removes the pressure on the spring, and it won't hold the sear against the hammer.... Put the safety back in....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
 
PostPosted: Sat Mar 21, 2015 3:15 pm Reply with quote
dirtracer88
New Member
New Member
Joined: 21 Mar 2015
Posts: 5
Location: beatrice, nebraska
Sorry I didn't explain a little better he never should have pulled that.pin to begin with when he did it released a spring and do not know how it goes back in.
View user's profile Send private message
 
PostPosted: Sat Mar 21, 2015 4:33 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
Again, if you are talking about the Disco, there is a small slot in the trigger guard just in front of the safety hole.... You will see the end of the spring in there.... Use a pin and pull it forward until you can slide the safety back in....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
 
PostPosted: Sat Mar 21, 2015 5:20 pm Reply with quote
dirtracer88
New Member
New Member
Joined: 21 Mar 2015
Posts: 5
Location: beatrice, nebraska
This is a varmint power pack 22 cal.
View user's profile Send private message
 
PostPosted: Sat Mar 21, 2015 5:21 pm Reply with quote
rsterne
Moderator
Moderator
Joined: 15 Jan 2008
Posts: 2998
Location: Coalmont, BC
Sorry, never heard of it, no idea what the trigger is like....

Bob

_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count!
View user's profile Send private message
 
PostPosted: Sat Mar 21, 2015 5:33 pm Reply with quote
dirtracer88
New Member
New Member
Joined: 21 Mar 2015
Posts: 5
Location: beatrice, nebraska
Yeah I can't find a diagram or anything else about it, but thanks for trying to help
View user's profile Send private message
 
PostPosted: Sun Mar 22, 2015 1:43 pm Reply with quote
AirGunEric
Site Admin
Site Admin
Joined: 20 Jan 2007
Posts: 6906
Location: "Out There"
If we are talking about the most recent "varmint power pack"- it is essentially a Trail NP synthetic stock rifle in a kit with a flashlight/laser and scope.

If it is this kit, then the trigger would be the same as the first generation NP rifles (not NP XL or NP2), if it is something else- i.e. I believe a 2289 kit a couple years ago may have been call a "varmint power pack" as well- we would need to know what.

_________________
`

I'd say "I care."

But I'd be lying.


Canadian Airgun Supplier: http://www.scopesandammo.com/storefront
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Mar 22, 2015 8:03 pm Reply with quote
dirtracer88
New Member
New Member
Joined: 21 Mar 2015
Posts: 5
Location: beatrice, nebraska
Yep it is the new one and I got it working again, thanks for all the help!!
View user's profile Send private message
benjamin varmit power pack help! 
  Air Gun Home Forum Index » Airgun Smithing
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.