 |  | | | |  |  |  |  | QB/SA80 Updated |  | |  |  |  |
Posted: Mon Apr 21, 2014 2:25 pm |
|
|
| Alstone |
| Moderator & Site Supporter |

 |
 |
| Joined: 01 Mar 2007 |
| Posts: 4139 |
| Location: Linconshire, ENGLAND |
|
|
 |
Since completing my QB/SA80 bulpup last year I have done very little in the line of updates to it, so with the spring here again and the Co2 season starting I decided to do a few mod’s I had been mulling over for the last few months.
I needed to move the scope back an inch and lift it about 1/8” to make it easier and quicker to acquire the target.
Next shorten the barrel to 11” for use in woodland, this turned out to be a good move, as this barrel as been a load of trouble since I bought it from Archers, I have been hacking bits off it for the last 5 years to try and find a good section. The last try was cutting it down to 16” this made a lot of difference and improved the grouping and it seems that chopping another 5” off as improved it even more, I am now getting ½” groups at 20m.
With shortening the barrel I needed to up the output to maintain the output of between 10 & 11 fpe, this involved increasing the valve volume and porting, this resulted in an output of 10.3fpe @ 60* F, the shot count as dropped to around 50 good shots as the short barrel is wasteful with Co2, which means a louder report so I use a suppressor when out and about.
I now have it fitted with a genuine military sling so that it either lays facing down under your arm or across your chest hands free.
BEFORE
AFTER
Al |
|
_________________
 |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | QB/SA80 Updated |  | |  |  |  |
Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT - 5 Hours
Page 1 of 1
|
|
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|