Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Rifles » Flattop valve caps for the 766/2100/2200 guns
Post new topic  Reply to topic View previous topic :: View next topic 
Flattop valve caps for the 766/2100/2200 guns 
PostPosted: Sat Oct 26, 2013 9:08 pm Reply with quote
Big Bore Bart
Member
Member
Joined: 26 Mar 2013
Posts: 35
I let myself get talked into making a run of flattop check valve ends for the 766/2100/2200 guns. Mr. Green

The first step was to make a plug of the factory cap.


Next was to turn that profile into steel


Cut flutes with a toolpost mounted Dremel


Nearly finished


After heat treating and final honing, it was used to make the first part.


This one will be installed in my 766 for testing. After testing, production begins. Smile
View user's profile Send private message
 
PostPosted: Sun Oct 27, 2013 5:07 pm Reply with quote
ace
Member
Member
Joined: 08 Jun 2013
Posts: 55
awesome looks good keeping my eyes on this Wink
View user's profile Send private message
Flattop valve caps for the 766/2100/2200 guns 
PostPosted: Sun Oct 27, 2013 10:40 pm Reply with quote
Big Bore Bart
Member
Member
Joined: 26 Mar 2013
Posts: 35
The tool is done, first cap is in my rifle and has been chronoed.


My 766 is highly modded, so your results may vary.Shrug Here's mine at 10 pumps with 7.9 CPHP's.


This is with a factory short check poppet, a very light valve spring, stock striker spring, a Delrin poppet, and an O-ring sealed breech.
It hits ~870 fps with 16 pumps now instead of 855 with 18 pumps. Mr. GreenCool The Starlings are gonna hate me. Twisted Evil Twisted Evil

Finished six brass ones today. Smile Broke my 1/16 drill bit Crying or Very sad need to buy a new one to continue.



Two have visibly off center inlets caused by a very flexible drill bit, being used to drill to deep. Embarassed

Those I may keep here. Once I have a new bit I will make a run of aluminum ones.

Ace: Are you the same on the Canadian forum? If so, do you have your PAL?
View user's profile Send private message
 
PostPosted: Tue Oct 29, 2013 1:43 pm Reply with quote
ace
Member
Member
Joined: 08 Jun 2013
Posts: 55
did you mean CAF ? Pm'd Cool
View user's profile Send private message
CAF 
PostPosted: Tue Oct 29, 2013 11:14 pm Reply with quote
Big Bore Bart
Member
Member
Joined: 26 Mar 2013
Posts: 35
Yep. That be the one. Pm'd
View user's profile Send private message
Flattop valve caps for the 766/2100/2200 guns 
  Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.