Click Here for AirGunHome.com Main Page
Argentina Australia Belgium Canada Chile Denmark France Germany Greece India
Italy Mexico New Zealand Netherlands Norway Russian Federation South Africa Spain Turkey United Kingdom United States
AirGunHome.com: THE Worldwide Airgun Forum


AirGunSeals.com Main Page Link
Air Gun Home Forum Index Register FAQ Memberlist Search

Air Gun Home Forum Index » Rifles » Hammerli Pneuma Opinion
Post new topic  Reply to topic View previous topic :: View next topic 
Hammerli Pneuma Opinion 
PostPosted: Fri Oct 29, 2010 9:10 pm Reply with quote
pipewelder_1999
Member
Member
Joined: 24 Oct 2010
Posts: 14
Location: Northeast Mississippi
I bought a .22 cal pneuma from AOA for $299.00 USD and was expecting some problems but out of the box the gun seems fine.

Crosman Premiers chronied at 895 averaged over 20 shots from a 200 Bar fill. High was 919 and low was 856 (1st shot after fill). A 30 shot group is shown below at 38 yards.

http://www.weldingdata.com/images/pneuma-30shots.jpg

The gun handles well for me. The trigger seems a little stiffer than I like and I hope to work on it some based on the information found here. The only other thing I don't like is the cocking lever and safety seem a little rough feeling. Like burrs or galling.

I had bought a QB78 PCP a few months ago and was unable to get the accuracy I wanted and spent a great deal of time tweaking which was fun. This gun shot much better right out of the box.

Anyway, just thought I'd share.

Gerald


Last edited by pipewelder_1999 on Sat Oct 30, 2010 8:20 pm; edited 1 time in total

_________________
Still trying to find a gun that doesn't shoot better than I do!
View user's profile Send private message Visit poster's website
 
PostPosted: Sat Oct 30, 2010 9:34 am Reply with quote
packrat
Senior Member
Senior Member
Joined: 16 Nov 2009
Posts: 882
Location: Out in the woods...Ellabell, GA.
So what's the distance from top to bottom shots? Hard to tell from the picture.....
Always nice to get what you pay for , huh?? I read some good reviews on that gun...was considering getting one not too long ago...ended up with AA S410..I think the Pnuma is same as the Hatsun airguns, made in Turkey IIRC....supposed to be a cut above average I believe Mr. Green Mr. Green The trigger can be improved upon, as you well know, just take your time.

_________________
HEY !! This getting old thing is NOT for sissies...
View user's profile Send private message Visit poster's website
 
PostPosted: Sat Oct 30, 2010 8:16 pm Reply with quote
pipewelder_1999
Member
Member
Joined: 24 Oct 2010
Posts: 14
Location: Northeast Mississippi
That group Measures about 1.5" from top to bottom.

I shot again today and was a little more picky about pellets. I noticed that some of the premiers were shaped like the crosman pointed pellets and many skirts bent so I looked at them a little closer.

Only had daylight for 20 shots. Here is the group.



Much better than the other day. The small circle at the top of the lower group was show 1,3,4.

I havent cleaned the barrel yet so may see how that does.

Gerald

_________________
Still trying to find a gun that doesn't shoot better than I do!
View user's profile Send private message Visit poster's website
 
PostPosted: Sat Nov 06, 2010 4:30 am Reply with quote
pipewelder_1999
Member
Member
Joined: 24 Oct 2010
Posts: 14
Location: Northeast Mississippi
The pneuma is doing great. I have about 400 pellets through it. Taken it squirrel hunting and am 3 for 5 with lots of leaves and wind. Longest shot 35 yards. I have owned a .177 TX 200 and Falcon FN19 in the past and I had been let down with most everything else as far as accuracy goes. The pneuma seems to be getting close.

After walking around the woods today and missing one I shot a few off a rest to see where I was hitting.

Elevation was dead on and windage was about 1/2" to the right I adjusted the scope for windage and put 5 pellets through the same hole in a piece of tin. Then stacked two pellets on top of a screw in the sheetmetal (old animal shelter in the pasture). All at about 40 yards.

I love the loading of this compared to a bolt action. Thinking about getting one in .177.

Have a good day

Gerald

_________________
Still trying to find a gun that doesn't shoot better than I do!
View user's profile Send private message Visit poster's website
 
PostPosted: Sun Nov 07, 2010 5:29 am Reply with quote
broommaster2000
Moderator
Moderator
Joined: 10 Mar 2007
Posts: 5714
Location: City of Groningen, Groningen, The Netherlands
I'm probably going to get one, if I can get my hands on a used one. Stuff has been looking up a bit lately! Mr. Green

_________________
BIG GAP
View user's profile Send private message
 
PostPosted: Sat Mar 10, 2012 10:20 pm Reply with quote
SifuGun
New Member
New Member
Joined: 10 Mar 2012
Posts: 2
pipewelder_1999 wrote:
The pneuma is doing great. I have about 400 pellets through it. Taken it squirrel hunting and am 3 for 5 with lots of leaves and wind. Longest shot 35 yards. I have owned a .177 TX 200 and Falcon FN19 in the past and I had been let down with most everything else as far as accuracy goes. The pneuma seems to be getting close.

After walking around the woods today and missing one I shot a few off a rest to see where I was hitting.

Elevation was dead on and windage was about 1/2" to the right I adjusted the scope for windage and put 5 pellets through the same hole in a piece of tin. Then stacked two pellets on top of a screw in the sheetmetal (old animal shelter in the pasture). All at about 40 yards.

I love the loading of this compared to a bolt action. Thinking about getting one in .177.

Have a good day

Gerald


May I ask why .177 ?
View user's profile Send private message
 
PostPosted: Mon Apr 02, 2012 11:37 pm Reply with quote
Fugaloo
New Member
New Member
Joined: 02 Apr 2012
Posts: 2
I've had mine for about a year and a half. I've taken 6 or 7 jack rabbits from as far as 40 yards, plus I finally got a turkey last fall. I have never killed a turkey that dead before. Dropped like a rock. This is a great deal on this gun, it's down to $250 now. I am very happy with it.
View user's profile Send private message
 
PostPosted: Tue Apr 03, 2012 11:46 am Reply with quote
mod90
Veteran Member
Veteran Member
Joined: 04 Jun 2011
Posts: 279
Yeah the Pneuma's a great rifle. Some say it's a "beginners" gun, but IMO thats a crock of crap to help bigger manufacturers to push their own stock Razz
The trigger is pull length & weight adjustable, but be careful. Adjusting it to have too short a length & too light a weight will literally disengage the safety & give you a hair trigger. That could be potentially dangerous. It's not pellet fussy, and indexes shot after shot without a skip or jam reliably and IMO the lever action feels more natural than a side bolt, but thats just my opinion. I was thinking on an FX Revolution or Monsoon recently, just for the semi-auto aspect of it, but I've decided to wait & see if Hatsan will come out with a semi-auto & go for that if it'll be available in future.

_________________
There is no tradition greater than the hunt, passed through countless generations. For those that enjoy the hunt, no explanation is needed. For those that do not, no explanation is good enough.
View user's profile Send private message
Re: Hammerli Pneuma Opinion 
PostPosted: Thu Apr 05, 2012 4:02 am Reply with quote
Serhadi
New Member
New Member
Joined: 05 Feb 2012
Posts: 3
Location: Izmir, Turkey
pipewelder_1999 wrote:
I bought a .22 cal pneuma from AOA for $299.00 USD and was expecting some problems but out of the box the gun seems fine.

Crosman Premiers chronied at 895 averaged over 20 shots from a 200 Bar fill. High was 919 and low was 856 (1st shot after fill). A 30 shot group is shown below at 38 yards.

http://www.weldingdata.com/images/pneuma-30shots.jpg

The gun handles well for me. The trigger seems a little stiffer than I like and I hope to work on it some based on the information found here. The only other thing I don't like is the cocking lever and safety seem a little rough feeling. Like burrs or galling.

I had bought a QB78 PCP a few months ago and was unable to get the accuracy I wanted and spent a great deal of time tweaking which was fun. This gun shot much better right out of the box.

Anyway, just thought I'd share.

Gerald


Hi Gerald,

If you carefully adjust the trigger load and trigger travel screws, you will see that both trigger and cocking/automatic safety action can get much smoother on that rifle.

I have the long version with a Lothar Walther barrel and Turkish walnut stock that uses the same mechanism.

Shoot safe and have fun.

Regards,

Serhad

_________________
0.22 HATSAN AT44W-10 Long LW + Hawke SW 30 8-32X56IRSF SR12
0.22 Norica Jet + Hawke Sport HD 3-9X40
0.22 H.Weihrauch HW45 + Maccari Spring
View user's profile Send private message MSN Messenger
Hammerli Pneuma Opinion 
  Air Gun Home Forum Index » Rifles
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  

Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.


Click Here for AirGunHome.com Main Page


Powered by phpBB © 2001-2004 phpBB Group
Partial Styling Supplied by Vjacheslav Trushkin Themes Database.