 |  | | | |  |  |  |  | Odd problem- Crosman 180 with sticking cocking knob... |  | |  |  |  |
Posted: Sat Nov 12, 2011 6:46 pm |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
I'm no expert on alot of the "older" airguns out there.
I have a Crosman 180 and the cocking knob, when pulled back, sits out until the trigger is released. Unfortunately, this also means the power output is extremely low unless you hold the cocking knob in with your thumb as you pull the trigger.
Anyone have any idea what is causing this? There does not appear to be any interference in the hammer path... |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Sat Nov 12, 2011 7:04 pm |
|
|
| AirGunEric |
| Site Admin |

 |
 |
| Joined: 20 Jan 2007 |
| Posts: 6931 |
| Location: "Out There" |
|
|
 |
Fiddled a bit, and have partially answered my own question.
Seems the cocking knob has a sort of "return spring" wrapped on the shaft underneath the hammer spring- seems to also act as a bit of an additional bit of load for the hammer spring. This old, thin thing is weak- not allowing the cocking knob to "pull" back in until the hammer is fully forward. Of course this means that the hammer, when moving towards the valvestem is also now help to "pull" the cocking knob back- reducing power output.
Additionally, it appears the hammer/cocking knob assembly cannot be disassembled to install a new spring or shim the old unit- anyone have any tips on this/something I've missed? |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|