 |  | | | |  | |  |  | 1377 valve internal parts and dims |  | |  |  | |
 Posted: Sat Dec 18, 2010 12:50 pm |
 |
|
| JustMatt |
| Member |
|
|
| Joined: 30 Mar 2010 |
| Posts: 45 |
| Location: US |
|
|
|
Does anybody have the valve of a 1377 taken apart by chance? I would greatly appreciate some rough dimensions from somebody who does since that is the one part of my 1377 I do not feel like taking apart. Even a close up picture of the parts with a ruler in the frame somewhere would even be great. The ID of the valve and any dims from the internal components would be amazing.
I have been digitizing my 1377 in hopes of making my own air pistol at some point in the future. I have a rough start but need to clear up a bunch of errors I accumulated while measuring all of the parts individually. Here's a sample of what I have so far...
(springs will be added last) |
|
|
|
|
|
|
| |  |  | | | |  |  |
| | | | | | | | | | | | | | |
| Posted: Sat Dec 18, 2010 4:56 pm |
|
|
| rsterne |
| Moderator |
 |
|
| Joined: 15 Jan 2008 |
| Posts: 2998 |
| Location: Coalmont, BC |
|
|
|
I can give you some dimensions....
OD of valve 0.618"
O-ring 5/8" x 7/16" (#111)
ID of front half 0.375"
Threads 1/2" - 20 NF
O-ring 7/16 x 9/16 (#013)
ID of back half ~0.44"
Exhaust Port ~0.14"
HTHs....
Bob |
|
_________________
Dominion Marksman Silver Shield - 5890 x 6000 in 1976, and downhill ever since!
Airsonal: Too many to count! |
|
|
|
|
|
| | | | | | | | |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|
