 |  | | | |  |  |  |  | Weirauch HW100K TH - Barrel moving |  | |  |  |  |
Posted: Tue Mar 30, 2010 10:01 am |
|
|
| rikwalter |
| New Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 9 |
| Location: Dorking, UK |
|
|
 |
Hello,
First time on the Forum so here goes...
I bought a second hand Weirauch HW100K with thumbhole stock in .22
Nikko Sterling Gameking Side LRX 4-16X50 AO IR
All the above is two years old and in excellent condition.
I have noticed two things while setting up the scope
1, I only get about 50 shots befoe the gauge drops to about 90bar from 200 and the pressue drops overnight by as much as 80bar!!!
2, I noticed that the silencer was loose so I tightened with my hand and the barell started to rotate with ease, I can just keep turning the barell in either direction, should this be possible?
Has anyone any ideas on how to remedy the problems?
Best regards
RiK |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Re: Weirauch HW100K TH - Barrel moving |  | |  |  |  |
Posted: Wed Mar 31, 2010 3:38 am |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
| rikwalter wrote: |
Hello,
First time on the Forum so here goes...
I bought a second hand Weirauch HW100K with thumbhole stock in .22
Nikko Sterling Gameking Side LRX 4-16X50 AO IR
All the above is two years old and in excellent condition.
I have noticed two things while setting up the scope
1, I only get about 50 shots befoe the gauge drops to about 90bar from 200 and the pressue drops overnight by as much as 80bar!!!
2, I noticed that the silencer was loose so I tightened with my hand and the barell started to rotate with ease, I can just keep turning the barell in either direction, should this be possible?
Has anyone any ideas on how to remedy the problems?
Best regards
RiK |
Hi Rik,
I take it it's a 12 Fpe rifle. The drop from 90 to 80 could mean you got a leaking O-ring. You'll need to have that replaced. I don't believe the barrel should be able to turn. I'll ask my buddy what the problem could be since he's more at home in Weihrauch rifles, and he owns a HW100SK. I'll get back to you about it as soon as I get an answer. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed Mar 31, 2010 4:34 am |
|
|
| rikwalter |
| New Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 9 |
| Location: Dorking, UK |
|
|
 |
Hi Broommaster2000,
Many thanx for the reply.
I look forward to your buddy's reply on the barrel issue.
Best regards |
|
_________________ Cheers
RiK
HW100K TH .22 NS Gameking 4-16X50 AO IR LRX
White Diamond O/U 30" MC Sporter
Don't come round my house dressed as a Pigeon |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed Mar 31, 2010 11:28 am |
|
|
| broommaster2000 |
| Moderator |

 |
 |
| Joined: 10 Mar 2007 |
| Posts: 5714 |
| Location: City of Groningen, Groningen, The Netherlands |
|
|
 |
Check out if the Allen screw that locks the barrel is still in good working order. You should be able to find it with a parts diagram
Provided by my local airgun-buddy, Jan. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Wed Mar 31, 2010 1:28 pm |
|
|
| rikwalter |
| New Member |

|
 |
| Joined: 30 Mar 2010 |
| Posts: 9 |
| Location: Dorking, UK |
|
|
 |
Hey,
Found the grub screw, it was loose, not by much but a quick full turn and all is in order.
I have marked my barrel in case this happens again as I now have to re-zero, shots dropped a bit and to the right!!
Many thanx
All I need to do now is find out how to increase the power by a bit as it is apparently only shooting at 10.5ft/lbs, I would like it back upto 11.5ft/lbs but not over 12 as i don't have a FAC but do have a Shotgun Cert that I do not want to loose....
 |
|
_________________ Cheers
RiK
HW100K TH .22 NS Gameking 4-16X50 AO IR LRX
White Diamond O/U 30" MC Sporter
Don't come round my house dressed as a Pigeon |
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|