 |  | | | |  |  |  |  | crosman 1322 |  | |  |  |  |
Posted: Sun Mar 16, 2014 11:12 pm |
|
|
harley75 |
New Member |

|
 |
Joined: 16 Mar 2014 |
Posts: 5 |
|
|
|
 |
i got a crosman 1322 for pest control now i want to know what will be the best pellet to shoot in this.I know there alot of different weights out there standred 14.9 but what if i go with a 12.3 would that give a little more boost out of the gun.What do you all think |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | Re: crosman 1322 |  | |  |  |  |
Posted: Mon Mar 17, 2014 6:35 am |
|
|
DavidSaunders |
Veteran Member |

 |
 |
Joined: 05 Mar 2014 |
Posts: 140 |
|
|
|
 |
harley75 wrote: |
i got a crosman 1322 for pest control now i want to know what will be the best pellet to shoot in this.I know there alot of different weights out there standred 14.9 but what if i go with a 12.3 would that give a little more boost out of the gun.What do you all think |
You would get a bit more speed, this is BAD in this case as you will also have less power. The power is the mass (eg 14.3 grain) at the speed so you want the heavier pellets for hunting/pesting. Usualy you want to find the heaviest pellet the gun will shoot reliably and accurately, as this will usually give you the most power on target. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Mar 17, 2014 7:28 am |
|
|
harley75 |
New Member |

|
 |
Joined: 16 Mar 2014 |
Posts: 5 |
|
|
|
 |
Ok then i'll start with the 14.9 then work my way up i got some 15. Somethimg coming i"ll try them also. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Mar 17, 2014 8:03 am |
|
|
DavidSaunders |
Veteran Member |

 |
 |
Joined: 05 Mar 2014 |
Posts: 140 |
|
|
|
 |
harley75 wrote: |
Ok then i'll start with the 14.9 then work my way up i got some 15. Somethimg coming i"ll try them also. |
Sounds good. It is also important to choose a pellet that shoots good out of your gun, and this is different for each gun (even if the same model). My 1322 and 2289 like home poored 21.2 grain .223 inch OD bullet shaped pellets, yours will likely like something different. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Mar 17, 2014 11:13 am |
|
|
harley75 |
New Member |

|
 |
Joined: 16 Mar 2014 |
Posts: 5 |
|
|
|
 |
I will mess around with different weights to see and a few brands crosman says the 14.9 destroyer the best but i read alot of people had trouble with them |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | more power is easy |  | |  |  |  |
Posted: Mon Mar 17, 2014 1:37 pm |
|
|
tommylucky |
Member |

|
 |
Joined: 11 Dec 2012 |
Posts: 35 |
Location: Portsmouth Va |
|
|
 |
Welcome to the forum and Semper Fi Devildog, and with that said let me add my 2 cents. First, for pest control I would recommend the stock to turn your pistol into a carbine. The accuracy difference will amaze you.
Next if you want some more power is to install a Benjamin Discovery hammer spring. Its easy and good for a few FPS. That's about all you can do without going into the gun. If you want to carry it to the next level, modify the valve you already have.With minimal tools you can add a lot more power.
You need to get rid of the right angle at the rear of the valve. Its done with a small file or a tiny carbide bit that will fit into the top port hole. Next file away the 4 bottom threads on the male end of the valve. If you have the right tools, grind away the bottom threads on the inside of the female end.Next, replace the spring in the valve with a lighter one. This allows you to shove more air into the valve.
Now, a lot of people will say, " hey,what abut a flat top piston and valve ?"
You can always do that later.What I just described can be done for next to nothing.The stock is 25 bucks, discovery spring 5 bucks, valve spring, about 50 cents.
Half the fun of air guns is working on them, making them better. Theres a lot of good information on this sight. Many knowledgeable people who will help.
I love your choice in airguns, I have a 2289 and love it. It tops out over 650FPS and that's fine.(for now)
\Good luck and God Bless The United States Marine Corps !!![img][/img[img][/img] |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Mar 17, 2014 2:08 pm |
|
|
harley75 |
New Member |

|
 |
Joined: 16 Mar 2014 |
Posts: 5 |
|
|
|
 |
Anyone got any pics on that whatyou said is new to me where to get the parts. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Mar 17, 2014 9:52 pm |
|
|
AirGunEric |
Site Admin |

 |
 |
Joined: 20 Jan 2007 |
Posts: 6910 |
Location: "Out There" |
|
|
 |
This level of valve 'tuning' isn't really required, it will gain you a bit, but not alot to write home about.
Look at acquiring a flat-top piston kit, less pumps to get to the same (or higher) power level. Then look at valve mods to the flat-top unit to make something more interesting.
As for sources for the FTP kits, there are 2 or 3 in the US, one in Canada, one in the UK. If we knew where you are located, this would help. |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Dec 15, 2014 3:07 am |
|
|
Robw |
Veteran Member |

|
 |
Joined: 30 Jan 2013 |
Posts: 441 |
|
|
|
 |
I have one that likes 21 grn Beeman Kodiaks.
Also, Eric is right about the flat top piston. Increasing the inner compression
chamber volume will require many more pumps. Whereas the flat top piston
arrangement retains the original chamber volume will give more velocity
while keeping the number of pump strokes to a minimum. |
|
_________________ Getting in a rush only slows you down.
Reflect Jesus Christ-Not your surroundings. |
|
 |
 |
|
|
|  |  |  | | | |  |  |
 |  | | | |  |  |  |  | |  | |  |  |  |
Posted: Mon Dec 16, 2024 2:16 pm |
|
|
alyxjame |
New Member |

|
 |
Joined: 16 Dec 2024 |
Posts: 3 |
|
|
|
 |
The Crosman 1322 is a versatile and reliable choice for pest control, and pellet selection can make a significant difference depending on your specific needs. Here's a breakdown of your options:
Pellet Weight and Performance:
Standard 14.3-grain pellets (e.g., Crosman Premier) are a balanced choice. They provide good energy retention and accuracy for small pest control.
Lighter pellets (e.g., 12.3 grains) can increase velocity slightly, but they may sacrifice penetration and stability at longer ranges. These are good if you’re targeting smaller pests at close range.
Heavier pellets (e.g., 15+ grains) offer better penetration and energy transfer, making them ideal for slightly larger pests or shots requiring deeper impact, though they will result in lower velocity.
Pellet Types:
Hollow points: Best for pest control due to their expansion on impact, providing maximum stopping power.
Wadcutters: Effective at short ranges; they deliver a solid punch but lose accuracy at longer distances.
Domed pellets: A good all-around option with better accuracy over distance and decent stopping power.
Testing for Accuracy:
Every air gun has its quirks, and pellet accuracy can vary from gun to gun. It’s worth testing a few different types and weights to see what works best with your Crosman 1322. Start with Crosman Premier Hollow Points and branch out to lighter or heavier pellets from brands like JSB, H&N, or RWS.
Velocity vs. Energy:
While lighter pellets can give a slight velocity boost, the energy (measured in foot-pounds of force) is more critical for pest control. Stick with pellets that provide consistent accuracy and sufficient energy to ensure humane Melbourne pest control
Recommendations to Try:
Crosman Premier Hollow Points (14.3 grains)
JSB Exact RS Diabolo (13.4 grains)
H&N Field Target Trophy (14.66 grains)
RWS Superdome (14.5 grains)
Try a few and see what your Crosman 1322 shoots best. Good luck, and let us know how it performs! |
|
|
 |
 |
|
|
|  |  |  | | | |  |  |
Note: If you are seeing "Please enter your username and password to log in." Your browser cookies have been reset
or you need to register to access the topic in question. Use the 'Register' button near the top left of this page.
|